Torkcraft
115 x 1.6 x 22.2mm - Metal Cutting Disc & SS | Torkcraft
Manufactured from high quality Resin and Corundum. Designed for steel cutting only. A steel cutting disc is used for: Mild steel cuttingCar body pa..
115mm x 22.23mm x 4T - Blade for Wood on Angle Grinder | Torkcraft
Blade 4 Teeth115mm X 22.23mm For Wood on angle grinderGreat Value! 15% VAT included in all prices.Delivery in Walvis Bay and Swakopmund is Free of Charge...
300mm x 1m - Sanding Paper Roll - 100 Grit | TorkCraft
SIZE: 300mm width, 1m length BACKING: Paper GRIT: P100 Application: An All Purpose Abrasive for renovation Due to the low competitive cos..
300mm x 1m - Sanding Paper Roll - 40 Grit | TorkCraft
SIZE: 300mm width, 1m length BACKING: Paper GRIT: P40 Application: An All Purpose Abrasive for renovation Due to the low competitive cost..
300mm x 1m - Sanding Paper Roll - 60 Grit | TorkCraft
SIZE: 300mm width, 1m length BACKING: Paper GRIT: P60 Application: An All Purpose Abrasive for renovation Due to the low competitive cost..
300mm x 1m - Sanding Paper Roll - 80 Grit | TorkCraft
SIZE: 300mm width, 1m length BACKING: Paper GRIT: P80 Application: An All Purpose Abrasive for renovation Due to the low competitive cost..
50mm - 75mm Quick Adjust G-Clamp
Quick Adjustable G-ClampThe G-clamp is used to secure work pieces to a bench or a template during an assembly. It can also be used in woodwork projects to gl..
80mm x 75mm - Corner Clamps | Tork Craft
Application: The corner clamp can be used for framing or light weight joinery. There is a cutting groove to allow a framing handsaw to cut a mitre. ..
10 Pcs Hex Ball Allen Key Set | 1.5mm - 10mm
10 Piece Hex Ball Point Key SetApplication The TorkCraft Hex Ball Point Allen Key set is made of high quality CrV steel, heat treated for high toughness a..
10 Piece Wire Brush Set With Hex Shank and Buff Kit
10 Piece Wire Brush Set With Hex Shank and Buff KitGreat Value! 15% VAT included in all prices.Delivery in Walvis Bay and Swakopmund is Free of Charge.Del..
100mm - 175mm Quick Adjust G-Clamp
Quick Adjustable G-ClampThe G-clamp is used to secure work pieces to a bench or a template during an assembly. It can also be used in woodwork projects to gl..
10mm - Chuck Key | Tork Craft
Fits 10mm (3/8 inch) chucks10mm Replacement key for our Tork Craft chucks. This chuck key will fit our range of 10mm chucks.Great Value! 15% VAT inclu..